Modeling Behavior : Dragonfly Structure 

Arch 655 Parametric Modeling in Design

Spring 2016

Instructor : Dr. Wei Yan

Texas A&M University 

Modeling Behavior : Dragonfly Structure

Arch 655 Parametric Modeling in Design
Spring 2016
Instructor: Dr. Wei Yan
Texas A&M University

Background 

This project utilizes the logic of dragonfly structure to design a pavilion. According to Mingallon and Ramaswamy (2011): 

“ The morphology of the dragonfly wing is an optimal natural construction built by a complex patterning process, developed through evolution as a response to force flows and material organisation. The seemingly random variations of quadrangular and polygonal patterns follow multi-hierarchical organizational logics enabling it to alter between rigid and flexible configurations” . 

“The wings of dragonflies are complex flexible aerofoils, whose deformations in flight are encoded in the distribution of rigid and compliant components within their structure. The wings have ‘smart properties’ adapted to deform automatically and appropriately in response to the forces they receive . The multiple configurations of the wing geometry could be understood by several factors, which influence the deformation; namely plan form geometry, corrugations, flexural stiffness, joints, mechanics, cambered infill membrane and hydraulics. These factors […] complement one another and collectively provide the dragonfly wing with a ‘complex emergent behaviour’, which is not the mere sum of the parts” . 

Flow analysis (Mingallon and Ramaswamy  , 2011)

Thickness distribution of the forewing of Sympetrum vulga- tum. (a) Thickness distribution of the veins. (b) Thickness distribution of the membranes source: (Lentink  , 2010 )

Analytically modelled spatial aerodynamic pressure and inertial load distribution over the forewing area during a stroke in hovering flight source: (Lentink  , 2010 )

 

Spatial deformations (shown 10 times enlarged) of a flapping Sympetrum vulgatum wing during hovering flight.  source: (Lentink  , 2010 )

Modeling in Rhino and Grasshopper

First : Geometry 

1. Start with a generic basic geometry : surface / Mesh

2. Deformation : deform that mesh by using Kangaroo physics-engine ( define the anchor points, the deformed forces ) 

 

3. Compare the two geometries together ( the original surface (A)  vs. the deformed surface (B) ), and extract the faces of each surface (Mesh).

4. find the center point of each face , then measure the degree of changes between status A and B : Displacement , Strain value 

5. Construct a domain for these values and dispatch faces into four groups 

6. Control the density of faces 

7.  Construct two patterns of points distribution according to the deformation value of the mesh faces

8. Construct the cells by using voronoi structure 

Second  : Structural Optimization (Karamba3d)

1. Use the curves from the previous operation as an input here

2. Explode the curves to get the segments and the vertices , then convert them into beams (line to beam)

3. Define the support location and type , Loads , Cross section, Material and Joints

  

4. Assemble the model and Review the results 

5. Analysis 

6. Two layers structure and Skin

 

Third  : Support options 

        

Fourth  : Video  

Fifth : Renderings